PAL 8500 Change Log

1.2.5 Beta 1 - 02-06-2014
--------------------------------------------

1.2.4 Beta 3 - 01-17-2014
--------------------------------------------
Added: 		Save/Load Sessions
Added:  	Export to Tarheel
Fixed: 	 	Importing from Tarheel
Changed:	Split Record and Playback Video into separate tabs.
Added:		Jump to Next or Previous Annotation.
Changed:	Scrollbar moves by 1/4 the visiable size, instead of 1s by 1s.


VERSION 1.1.24
	Added Exporting the Voltammogram to TSV
	Added Exporting the Time Plot to TSV

VERSION 1.1.23
	Fixed/Added Zoom tool for the Time versus Current Plot.
	Can now export the time versus current data to tsv.

VERSION 1.1.22
	Added Spin Ctrl to allow changing of view size while looking at continuous data
		Use The "Settings->Reset Layout" Menu Item to make this appear.
		ENTER does not work, but moving away or using the arrow key will update the display.
	Added Analyze > Generate Time v current plot for a given voltage.

VERSION 1.1.21
	Fixed Crashing on computers without video
	Fixed Crash on exit when having not recorded.
	Removed Extended Continuous Mode.

VERSION 1.1.20
	Added periodic stimulation during continuous mode recorded.

VERSION 1.1.19
	Video playback bugs.
	Shortened turn around time.

VERSION 1.1.18
	Fixed a couple of video capture bugs.
	Fixed a video playback bug.

VERSION 1.1.17
	Fixed Bugs in Video Capture Tools
	Added Video Playback.
	Fixed some bugs in Long Term recording opening of files.
	Removed "Open FSCV", just use "Open" for both tsv and .fscv files.
	Removed the display of the .db3 files from the open dialogs.

VERSION 1.1.16
	Re-enabled Video Capture

VERSION 1.1.15
	Re-enabled the Gain Select

VERSION 1.1.14
	Change upsweep color to black down and green up.
	Added electrode placments.
	Added a notes section
	Fixed a bug in the display of the voltammograms in the bottom right.
	Toolbars can now be toggled from the menu.
	Autosize is check by default for print settings.
	print size is 3"x5" by default when not auto-scaled to the page.
	Fixed a lockup bug in continuous mode when start or stopping a recording.
	Disabled the time line after closing a continous datafile.

VERSION 1.1.13
	Added sweep/stim/sweep settings to the list of things saved.
	Added check of sweep checksums.
	Fixed a bug in the mean filter on the tail end.
	Adds Annotation to the database on a lost packet. (not displayed, yet).
	Moved the Stim and Servo Highlight to time vs current plot.	

VERSION 1.1.12
	Save all known parameters.
	Load all known parameters.
	Fixed some bugs in loading saved files and displaying properly.
	Edited default values for the 8500 to match updates to firmware.
	Experiment information saved/load with the file.

VERSION 1.1.11
	Added a new Sweep Stim Sweep Command
	Displays the Stim on the Sweeps
	Saves (but does not load) some of the experiment variables.

VERSION 1.1.10
	Fixed a bug in the altering of sweeps values.
	Fixed RED Voltage Line display in voltammograms.

VERSION 1.1.9
	MS/uS controls merged where applicaple.
	Stimulus enable/disable bug fixed.

VERSION 1.1.8
	Stimulus communication fixed.

VERSION 1.1.7
	Stimulus reload value fixed.

VERSION 1.1.6
	Changed the stimulus functionality.

VERSION 1.1.5
	Displays name after saving display.
	Added Print size settings.
	Changed condition mode to disable the watchdog.
	Altered filtering to reduce introduced errors.
	Fixed Continuous Mode File Saving.
	Fixed a sweep calculation, off by one.
	Removed auto-background removel in Continous Playback.

VERSION 1.1.4
	Checks if data has been saved or not.
	Continuous Mode is now a checkable item.
	"Remove Background?" is now unchecked.
	Median Filter on by default.
	

VERSION 1.1.3
	Bug fix in pump delay timer.
	Change DAC on Stims to Stim multiplier.
	Scaling fix on the stim multipler.
	

VERSION 1.1.2
	Added count down timer for pump controls.
	Fixed a bug in communication of the stim settings.

	
VERSION 1.1.1
	Added controls for a more riggorous conditioning of the board.
	Added icons to the menus
	Removed the butter worth filters from being visible in the GUI.
	Disabled auto-connect to FSCV device.
	Added a second gain control for clarity.

VERSION 1.1.0
	UPDATE TO FIRMWARE and HARDWARE!
	Changed AGND to match
	Altered the handling of incoming sweeps to match firmware.
	Top 2 bits are now in the last byte of sweep data.
	Gain adjust controls are better.

---------------------------------------------------------------

VERSION 1.0.28
	Added a Set button to the gain settings.
	Altered the size of the sweep settings panel to match
	Altered AGND from 1.6 to 1.314

VERSION 1.0.27
	Hid the idle button. 
	On connection sends a condition command.
	Who knows what else.

VERSION 1.0.26
	Fixed a bug in autoscale button.
	Added Gain Controls for the new version of software
	Fixed a potential dead lock when analyzing data while streaming data
	Automatic reconnection to Serial Ports.
	Hid the servo control band until needed.


VERSION 1.0.25
	Reduced default stims to 10
	Remove right click menus from plots.
	Remove toolbar from voltammogram plot
	Added toolbar to spectral plot
	Added automatic reconnection to serial ports
	Fixed a bug in saving to the parameters database
	Moved the color controls to a separate window
	

VERSION 1.0.24
	SErvo Controls now automatic.

VERSION 1.0.23
	Updated the Pump Controls to include volume and flow rate
	Changed the Sweep Stim Sweep control.
	

VERSION 1.0.22
	Added Servo Motor Control
	Altered the sweeps controls.

VERSION 1.0.21
	Added Basic Pump Controls
	Voltammogram marker is set to 0 after a set of sweeps.
	

VERSION 1.0.20
	Save Image and Print Screen for Entire application.
	Default to 200 Cycles.
	AutoScale for Current across all quad plots.
	Fixed Bug in analysis while receiving data.
	Background removal optional in front view of data. (can see raw version).
	Video Panel does not show up on computers with no cameras.

VERSION 1.0.19
	Gain settings Fix.
	Added Continuous Mode.
	Added Video Recording.
	Removed Continuous Programs.
	Save Gain Settings.
	Save Cycle Settings.

VERSION 1.0.18
	Fix to the gain settings.

VERSION 1.0.17
	Fixed a but in the stim command.

VERSION 1.0.16
	Auto Reconnects while in continuous mode.

VERSION 1.0.15
	Changed the text rendering to look cleaner.
	Fixed the 3D Plot to display properly while recording.
	Added a reset button to the 3D plot.
	Sweeps after average are no longer displayed.
		Animation Included.
	Changed colors to make the Voltamagram a black line on the spectral plot.
	SyncLocked the apply median filter tool button.
	Auto checked remove background check box.

VERSION 1.0.14
	Modified the 3D plot mouse handling.
	Altered the 10us to be 100us.

vERSION 1.0.13
	Added back in the 3D plot.
	Added the voltammograms.
	Updates the diff lines to display values on the lines themselves.

Version 1.0.12
	Showing the adjust line without the need to 'play'.
	Added back in the 3D plot.
	Moved the voltammogram plots to the lower right
	Removed the stim display.
	Added diff lines to to the voltammogram and the time plot.

